data brief for further information contact your local stmicroelectronics sales office. august 2010 doc id 17799 rev 1 1/3 3 STM3210C-EVAL STM3210C-EVAL evaluation board features three 5 v power supply options: ?power jack ? usb connector ? daughterboard boot from user flash, system memory or sram i2s audio dac, stereo audio jack 2 gbyte microsd card? or bigger both a and b type smartcard support i2c compatible serial interface 64 kbit eeprom, mems and i/o expander rs-232 channel irda transceiver usb otg full speed, usb microab connection ieee-802.3-2002 compliant ethernet connector two channels of can 2.0a/b compliant connection inductor motor control connector jtag and trace debug support 3.2? 240x320 tft color lcd with touch screen joystick with 4-direction control and selector reset, wakeup, tamper and user buttons 4 color leds rtc with backup battery mcu consumption measurement circuit extension connector for daughterboard or wrapping board description the STM3210C-EVAL evaluation board is a complete development platform for stmicroelectronic's arm cortex-m3 core-based stm32f107vct microcontroller. the range of hardware features on the board help you to evaluate all peripherals (usb-otg fs, ethernet, motor control, can, microsd card tm , smartcard, usart, audio dac, mems, eeprom and more) and develop your own applications. extension headers make it easy to connect a daughterboard or wrapping board for your specific application. table 1. device summary order code reference STM3210C-EVAL stm32f107vct evaluation board www.st.com
STM3210C-EVAL 2/3 doc id 17799 rev 1 STM3210C-EVAL hardware block diagram figure 1 is a block diagram of the STM3210C-EVAL hardware. figure 1. hardware block diagram demonstration software demonstration software is preloaded in the board?s flash memory for easy demonstration of the device peripherals in stand-alone mode. for more information and to download the latest version, refer to www.st.com. revision history stm32f107vct rs-232 transceiver irda transceiver smartcard interface 3.3v regulator tft lcd microsd card audio dac 2 bnc connector mc control connector leds,key jtag mems potentiometer smartcard connector integrated rj45 connector usart 2 db9 connector adc i2s2 gpio mii/rmii usart3 i2c1 extension connector for gpios mcu consumption measurement phy usart2 can1 can transceiver can db9 connector mc spi3 trace debug otg usb microab connector eeprom i/o expander joystick touchscreen usb power switch can2 can transceiver can db9 connector battery voltage measurement table 2. document revision history date revision changes 06-aug-2010 1 initial release.
STM3210C-EVAL doc id 17799 rev 1 3/3 please read carefully: i nformation in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st? ) reserve th e r ight to make changes, corrections, modifications or improvements, to this document, and the products and services described her ein at an y t ime, without notice. a ll st products are sold pursuant to st?s terms and conditions of sale. p urchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st ass umes n o l iability whatsoever relating to the choice, selection or use of the st products and services described herein. n o license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. if any part of th is d ocument refers to any third party products or services it shall not be deemed a license grant by st for the use of such third p arty produc ts o r services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoeve r of suc h t hird party products or services or any intellectual property contained therein. u nless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implie d w arranty with respect to the use and/or sale of st products including without limitation implie d w arranties of merchantability, fitness for a parti cular purpose (and their equivalents under the law s o f any jurisdiction), or infringement of any patent, copyright or other intellectual property right. u nless expressly approved in writing by an authorized st representative, st products are no t r ecommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustainin g a pplications, nor in products or systems where failure or malfunction may result in personal injur y, d eath, or severe property or environmental damage. st products which are not specified as "automotiv e g rade" may only be used in automotive applications at user?s own risk. r esale of st products with provisions different from the statements and/or technical features set forth in this document shall i mmediately vo id a ny warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoeve r, an y l iability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
